Wall & Ceiling Mount
Clean Go – Portable Dust Collector
The CLEAN GO is the ideal solution for self-contained source capture of light duty weld fume and other airborne contaminants in the workplace. This portable, compact fume collector offers simple 120-volt plug-n-go convenience. The Clean Go is designed using the state-of-the art technology in source capture and is a powerful, low-maintenance solution for even tough weld fumes.
Ideal for a wide variety of intermittent duty applications, the Clean Go captures hazardous fumes and dust at the source from most welding applications. The completely articulated, extendable extraction arm, capable of full 360° rotation, can be easily positioned to remove hazardous smoke and particulate before it contaminates the operator breathing zone. Built to easily pass through standard doorways, the highly maneuverable Clean Go is ready to run with the flip of a switch.
Weld fumes or other airborne contaminants are captured by the Clean Go, with incredible 900 CFM airflow, and are drawn into the unit. Lighter contaminants are then captured by two high-efficiency cartridge filters followed by an activated carbon filter to absorb gases. Clean air is then returned back into the workplace.
For more information about Clean Go – Portable Dust Collector,
The HCF Series Horizontal Cartridge Filtration Systems are designed to provide efficient, cost effective control of dry dusts, fumes, and general air borne particulate contaminants generated from sanding, grinding, welding, and other processes. Typically utilized for control of moderate to heavy concentrations of dry contaminates, the HCF series collectors are provided with self-cleaning, pulsejet filter cleaning to minimize maintenance and reduce replacement filter costs.
The ceiling mounted HCF series collectors are available in two configurations, un-ducted models for ambient air cleaning of the general plant air and ducted source capture systems for control of contaminates at the generating source.
For more information about HCF,
The Wall Mount Fume Collector, WFC-1000 unit is designed to provide efficient, cost effective control of dust, fume, smoke and odor contaminants generated from a variety of manufacturing and process applications. Typically used for control of low to moderate concentrations of dry contaminants, the WFC-1000 can be used on a variety of processes that generate dust, fume, smoke or odor. The filters in the WFC-1000 are disposable and could last 6 to 12 months depending on hours of operation and type of particulate. The Wall Mount Fume Collector will help with compliance to local OSHA regulations by drawing contaminants away from the operator’s breathing zone and reduce emissions to an acceptable level.
The WFC-1000 Collector comes standard with three stages of filtration, the first is a spark arrester, the second a 35% efficient pleated filter, and a third is a 95% efficient fiberglass box filter with 58 square feet of high loft fiberglass media. Optional 99.97% at 0.3 micron HEPA and carbon for odor is also available. Also standard is a single phase 1 HP TEFC motor with non-overloading direct drive blower, tool-less filter access door.
For more information about WFC,