Dust Cab (DC) 800 DDT (Downdraft Table)
Dust Cab Filtration Systems are designed to provide efficient, cost effective control of dry dusts, fumes and smoke generated from sanding, grinding, welding, and other processes. Typically used for light to moderate concentrations of dry contaminates, the Dust Cab collectors are provided with manual bag shaker cleaning to minimize maintenance and reduce replacement filter costs. The Dust Cab unit is a smaller sized collector and a low cost alternative to the self cleaning cartridge dust collector.
The Dust Cab 800 can be configured a couple of different ways, as a floor mounted unit or a portable unit utilizing a caster mount. The Dust Cab 800 unit is a self-contained, ready to be powered, compact source capture dust collector. The overall size of the collector is designed to fit under a standard work bench.
For more information about Dust Cab (DC),
SPCD-1000/2000 Downdraft Table
The SPCD-1000/2000, portable cartridge downdraft benches are engineered for effective, economical control of dry dusts, fume and smoke generated from sanding, polishing, grinding and more. Ideal for light to moderate concentrations of dry contaminants, fumes, vapors, smoke and particulate are drawn down and back- away from the operator’s breathing zone. Highly efficient cartridge filters trap particulate down to .5 microns, while pulse-jet compressed air blasts keep filters clear and operating at optimum efficiency.
The SPCD-1000/2000 are compact and portable. Topped with an aluminum surface to protect parts that cannot be scratched, the SPCD can support a table load of 50 pounds per square foot. The top has a back enclosure with hinged side wing panels to expand and enclose the work zone.
For more information about SPC Downdraft Tables,
3444B & 3444B Super Downdraft Table
This is our most popular table. It measures 34” X 44” and weighs 375 lbs. Comes standard with 3 ½” rigid casters. The 3444B is available on 110 volt or three phase electric. The tough rubberized table top has side ports to provide extra dust collection. Pushbutton cleaning blows dust off the filter and drop it into the drawer below. A timer for automatic filter cleaning is also available.
The model 3444B Super is similar to the 3444B, but contains a larger fan and motor and has our typical rails and tops that are found on our larger tables. There is no vise available due to the different construction of the top. This model comes equipped with an 80/20 cartridge filter that cleans with a 99.95% capture rate at 0.5 micron, either activated by operator pushing a switch button, or an optional timer. Standard casters provides mobility, this is a great machine for the one person sanding station.
3648-SD Downdraft Tables
The model 3648-SD sit down or grinding is perfect for small shops, accommodating situations where setting is preferred. Complete with pushbutton cleaning, this model comes with 80/20 cartridge filter that cleans at 99.95% capture rate at 0.5 microns.
These tables are designed to accommodate a variety of sanding, metal grinding, welding, and light plasma applications. The 3648-SD comes standard with one 100% polyester flame retardant filter, which cleans with 99.95% efficiency at 0.5 micron. A water pan placed over the filter helps protect it from exposure to hot sparks and extends the life of the filter. Cleaning is done by the jet pulse automatic cleaning that uses the compressed air inside the air tank. It releases instantly in the filters pushing the dust off and into the drawer below. Table top surface is composed of durable single piece ¼” metal plate. A removable spark shield with hinged ends provides spark protection for area workstations. The Model 3648-SD is also a great table for the smaller shops.
For more information about 3648-SD Downdraft Tables,
3660 Downdraft Table
2872-B, 2672-B, 3696-B, 4896-B
The 3660 Model tables are very popular with the small to medium sized shops. Many large shops use this model line when sanding small items to allow each sander to have their own station. Standard features are 115 volt and casters and these features can be varied. They come with 4 – swivel casters including two that lock. When mobility is important this model line is your best choice. If ordered with three phase, the table will come with a magnetic starter. The height can be requested from 29″ without casters to any reasonable height.
This table may be used for grinding steel and some non-ferrous metals. It may also be used for welding applications. This model contains on 16” x 34” Flame retardant cartridge filter that cleans 99.9% down to .5 micron and has water pans built over the filter to protect it from exposure to hot sparks. This extends the life of the filter. The filter is cleaned by compressed air. The contents of an air tank in the machine are released instantly into the filter and pulse dust off of the filter, which falls into the drawer below. This cleaning procedure is done by activating a switch, which pulses the filter.
For more information about 3660 Downdraft Table,
9600 Downdraft Tables
2872, 3672, 3696, 4896 – Self Cleaning Filter Systems
The Model 9600 is designed to accommodate a variety of sanding, metal grinding, welding, and light plasma applications. This table comes standard with four 100% polyester flame retardant filters. This model features the new tube filtration system, which cleans with a 99% capture rate at 1 micron. A water pan is placed over the filter to help protect it from exposure to hot sparks and also extends the life of the filter. Cleaning is jet pulse push-button, which uses the compressed air inside the air tank. The air releases instantly in the filters pushing the dust off and into the drawer below.
This table is the best seller because of its size. With the 48″ x 96″ top it has been used for large parts or 3-4 operators. With ¼” durable metal plate of table top surface and removable spark shields with hinged ends to capture spark protection. Casters are a standard feature, coming with 4 – swivel casters including two that lock.
For more information about 3600 Downdraft Table,
Air Powered Bench Downdraft Tables – APB Series 4250, 4276 and 4802
Air Powered Bench Downdraft Tables are designed to provide cost efficient control of dust, smoke, fume and gas/vapor contaminants generated from a variety of manufacturing and process applications.
Typically used for control of moderate to heavy concentrations of dry contaminants, the APB Series Tables can be used for grinding, polishing and dry-buffing.
These self-cleaning systems can be either manual or automatically controlled to minimize maintenance and reduce replacement costs. Stay in compliance to OSHA regulations by drawing contaminants away from the operator’s breathing zone.
The unit comes standard with retardant cartridges, TEFC motor with non-overloading direct drive blower, dust drawer, and tool-less filter access door.
Three table top sizes are available: 42” x 50,” 42” x 76,” and 48” x 102.” The table top air velocities are approximately 200 feet per minute, with the loads for the bench being 75 pounds per square foot.
For more information about Air Powered Bench Downdraft Tables,
Hazdust Wet Downdraft for Combustible Dusts
Hazdust Wet Downdraft Tables are designed to provide efficient, cost effective control of all flammable and non-flammable metal dust contaminants generated from a variety of manufacturing and process applications. Typically used for control of moderate to heavy concentrations, the Hazdust series tables can be used for grinding, polishing and dry buffing. The auto water fill with low level shutoff system can minimize the maintenance. Washable high efficiency mist eliminator provides reduced filter replacement costs.
The Hazdust will help with compliance to local OSHA and NFPA regulations by drawing contaminants away from the operator’s breathing zone and reducing the flammability concerns with metals such as aluminum, titanium, and magnesium.
The unit comes standard with stainless steel construction on wetted surfaces, direct drive blower and TEFC motor, polypropylene mist eliminator, auto water level control with low level shutoff, and a factory pre-wired control panel. Three standard table top sizes are available: 30” x 36,” 36” x 48,” and 36” x 72.” Table top air velocities are approximately 400 feet per minute. Typical table top loads for the bench are 75 pounds per square foot.
For more information on Hazdust Wet Downdraft Table – Dust Collectors,