Air Powered Bench Downdraft Tables
Air Powered Bench Downdraft Tables are designed to provide cost efficient control of dust, smoke, fume and gas/vapor contaminants generated from a variety of manufacturing and process applications.
Typically used for control of moderate to heavy concentrations of dry contaminants, the APB Series Tables can be used for grinding, polishing and dry-buffing.
These self-cleaning systems can be either manual or automatically controlled to minimize maintenance and reduce replacement costs. Stay in compliance to OSHA regulations by drawing contaminants away from the operator’s breathing zone.
The unit comes standard with retardant cartridges, TEFC motor with non-overloading direct drive blower, dust drawer, and tool-less filter access door.
Three table top sizes are available: 42” x 50,” 42” x 76,” and 48” x 102.” The table top air velocities are approximately 200 feet per minute, with the loads for the bench being 75 pounds per square foot.
For more information about Air Powered Bench Downdraft Tables,
Hazdust Wet Downdraft Table- Dust Collectors
Hazdust Wet Downdraft Tables are designed to provide efficient, cost effective control of all flammable and non-flammable metal dust contaminants generated from a variety of manufacturing and process applications. Typically used for control of moderate to heavy concentrations, the Hazdust series tables can be used for grinding, polishing and dry buffing. The auto water fill with low level shutoff system can minimize the maintenance. Washable high efficiency mist eliminator provides reduced filter replacement costs.
The Hazdust will help with compliance to local OSHA and NFPA regulations by drawing contaminants away from the operator’s breathing zone and reducing the flammability concerns with metals such as aluminum, titanium, and magnesium.
The unit comes standard with stainless steel construction on wetted surfaces, direct drive blower and TEFC motor, polypropylene mist eliminator, auto water level control with low level shutoff, and a factory pre-wired control panel. Three standard table top sizes are available: 30” x 36,” 36” x 48,” and 36” x 72.” Table top air velocities are approximately 400 feet per minute. Typical table top loads for the bench are 75 pounds per square foot.
For more information on Hazdust Wet Downdraft Table – Dust Collectors,
Remote Downdraft Tables
The IAS Remote Benches are designed to provide efficient capture of dusts, fumes, and gas/vapors generated from a variety of manufacturing operations and processes such as buffing, grinding, sanding, cutting, polishing, gluing, bonding, mixing, and for certain welding applications.
The Remote Benches are typically used on applications where work is done on a table and contaminants are generated close to the work surface. Contaminants generated during operations are drawn through the openings in the table top into the plenum base where larger particles and chips (if generated) will fall out of the airstream. Remaining airborne contaminants are drawn into the duct connected to the back of the table and are exhausted outside or to an optional filtration system for removal.
Remote Benches can be equipped with the optional back and hinged side panels to help contain contaminants thrown from operations such as buffing, grinding, sanding, cutting, and polishing. The hinged side panels can be unlocked and opened to allow parts longer than the table itself to be worked on.
Unlike competitors light duty remote benches manufactured from sheet metal, the IAS Remote Benches feature framework of welded angle iron construction with a rugged, heavy duty 12 ga galvanized steel metal work surface and are designed for industrial applications. In addition to the Remote Benches, we can provide exhaust blowers or complete air filtration systems for the collection and removal of airborne contaminants generated.
For more information about Remote Downdraft Tables,
SPC Downdraft Table
The SPCB- 1000/2000, portable cartridge downdraft benches are engineered for effective, economical control of dry dusts, fume and smoke generated from sanding, polishing, grinding and more. Ideal for light to moderate concentrations of dry contaminants, fumes, vapors, smoke and particulate are drawn down and back- away from the operator’s breathing zone. Highly efficient cartridge filters trap particulate down to .5 microns, while pulse-jet compressed air blasts keep filters clear and operating at optimum efficiency.
The SPCB- 1000/2000 are compact and portable. Topped with an aluminum surface to protect parts that cannot be scratched, the SPCB can support a table load of 50 pounds per square foot. The top has a back enclosure with hinged side wing panels to expand and enclose the work zone.
For more information about SPC Downdraft Tables,