Portable Fume & Smoke
Clean Go – Portable Dust Collector
The CLEAN GO is the ideal solution for self-contained source capture of light duty weld fume and other airborne contaminants in the workplace. This portable, compact fume collector offers simple 120-volt plug-n-go convenience. The Clean Go is designed using the state-of-the art technology in source capture and is a powerful, low-maintenance solution for even tough weld fumes.
Versatility, Convenience Ideal for a wide variety of intermittent duty applications, the Clean Go captures hazardous fumes and dust at the source from most welding applications. The completely articulated, extendable extraction arm, capable of full 360° rotation, can be easily positioned to remove hazardous smoke and particulate before it contaminates the operator breathing zone. Built to easily pass through standard doorways, the highly maneuverable Clean Go is ready to run with the flip of a switch.
Operation Weld fumes or other airborne contaminants are captured by the Clean Go, with incredible 900 CFM airflow, and are drawn into the unit. Lighter contaminants are then captured by two high-efficiency cartridge filters followed by an activated carbon filter to absorb gases. Clean air is then returned back into the workplace.
For more information about Clean Go – Portable Dust Collector,
Die Cast Extraction
The Die Cast Filtration systems are designed to provide efficient, cost effective control of water-soluble die lubricants found on die casting machines. Typically used for control of moderate to heavy concentrations of mist and smoke contaminants, the Die Cast series collectors are provided with six stages of mechanical filtration to minimize maintenance and reduce replacement filter costs.
The Die Cast system consists of three main filter cabinet assemblies. The first cabinet houses three banks of cleanable Chevron impinger prefilters mounted in series. The second cabinet contains a cleanable metal mesh filter followed by a pleated multi-vee intermediate filter, and the fourth filter stage multi-pocket ASHRAE fiberglass vee-bag filter. The third and final cabinet houses a cleanable metal mesh filter and a sixth-stage HEPA filter rated 99.97% efficient at 0.3 microns. Following the sixth stages of filters is a blower and motor ranging from 3 HP to 25 HP with the blowers for the 12,000 series and higher being remote.
An option is to mount the filter cabinets and blowers on a supporting frame with casters, which is mounted above the die cast machine with a canopy hood over the die area. The Die Cast system can move on the casters to allow the dies to be changed from the machine.
The Die Cast system is a complete filtering system ready to be adapted to a support structure over the die cast machine to satisfy many industrial requirements.
For more information about Die Cast Extraction,
The Fume Fighter high efficiency fume extractor removes harmful particulates, fumes and gases before they reach the worker’s breathing zone. Overexposure to lead, cadmium, and fluorides can lead to employee health problems, increased medical costs and decreased productivity. Can the Fume Fighter help your work environment?
With a HEPA filtration, stopping 99.97% of all particles 0.3 microns or greater, this is the most protective filter available and is specified by OSHA for use with lead or cadmium. The FumeFighter triple filtration fume extraction systems includes two stages of mechanical filtration followed by a third stage of activated charcoal (carbon) for control of gaseous contaminants. All three filtration stages are independent allowing for maximum use of air cleaners. The FumeFighter provides a generous 82 square feet of filter area; the maximum available in its class. This translates into maximum filter life and value. The FumeFighter® also comes with a full 15 pounds of carbon compared to 5 pounds for competitive units. This also translates into minimum maintenance and maximum cost effectiveness.
The FumeFighter fume extraction system is designed for use with one or two arms, but if you desire a central air cleaner system for your multiple soldering stations, we also offer modular systems to handle larger requirements. These fume extraction systems also feature true HEPA air filtration and may be used with up to 20 soldering stations and are available with up to a 5 hp motor.
For more information about Fume Fighters, download
Iperjet DF Cartridge Dust Collectors
The IPERJET DF is equipped with horizontal filter cartridges suitable for suction and filtration of welding fumes, fine and coarse dusts as well as small quantities of chips, dusts/fumes from thermic cutting.
Great For– Grinding, Deburring, Laser Cutting, Welding, Marking, and Much More.
- High efficiency filtering for fine and coarse dusts.
- High performance fan.
- Lower noise level.
- Internal spark chamber.
- Energy saving.
- Horizontal cartridges make for easy access and quick maintenance.
- Portable unit.
For more information about Iperjet DF Cartridge Dust Collectors,
Jet Clean DF- Portable Dust Collectors
These portable cartridge dust and fume collectors are designed as a cost-effective, highly efficient, solution for OSHA compliant filtering of dusts, fumes, smoke, gasses, and vapors.
Maintaining filters at optimum efficiency has always been a problem for traditional collectors, especially for welding fumes and dust. The JET CLEAN DF line of collectors offers a state-of-the-art system a portable unit with long-lasting cartridges and a fully AUTOMATIC compressed air cleaning system- exclusive of Coral design & like no others in its class.
Extremely quiet plug-n-go operation, combined with incredible maneuverability and a powerful 1, 1 .5 or 3 horsepower motor (for up to an amazing 1890 CFM airflow), make the JET CLEAN OF an ideal solution for a wide variety of process applications, including welding, sanding, grinding and deburring.
Fumes are captured by the patented EVOLUTION NO-SMOKE extraction arm, travelling through a separate dirty air plenum where heavier particulate drops from the air stream. The contaminated air then passes through a metal prefilter that acts as a spark arrester, and is finally filtered through high efficiency cartridges, returning clean air is to the environment.
For more information about Jet Clean DF- Portable Dust Collectors,
Our most economical fume and dust collector, the ultra portable Mobile 1B is a powerful, self contained, and low maintenance solution for highly effective source capture of fumes, dust, smoke and vapors, from a host of applications- welding, soldering, etching, and more. This compact, super-maneuverable unit gets fume and dust collection right where you need it. Designed to fit easily through standard doorways, the seven-foot articulated flexible arm rotates a full 360o and supports itself in any position.
The capture hood with adjustable flow damper ensures precise positioning and powerful vacuum suction for fast extraction of fumes, dust, smoke and vapors before they contaminate the operator’s breathing zone and without inhibiting operator movement. The Mobil 1B multiple filter system- including prefilter, main filter, and carbon or HEPA final filter- allows you to customize the most effective filtration for your specific contaminant issues.
For more information about Mobil 1B,
The ultra portable heavy duty SM12-P is engineered for highly effective and reliable source capture of VOCs, hazardous fumes, noxious odors and toxic vapors from a wide variety of applications- welding, soldering, etching and more. This compact and very maneuverable unit gets fume collection right where you need it. Designed to fit easily through standard doorways, the seven foot articulated flexible arm rotates a full 360o and supports itself in any position. The unit comes standard with nominal 800 CFM and plug-n-go 110 Volt operation.
The 12″ capture hood with adjustable flow damper ensures precise positioning and powerful vacuum suction for fast extraction of fumes, odors, smoke and vapors from the operator’s breathing zone, without inhibiting operator movement. The SM12-P modular filter system – including HEPA, activated carbon and potassium permanganate filters – allows you to customize the most effective filtration for your specific contaminant issues.
For more information about SM12-P, download ACT-SM12P-Fume-Collectors.pdf.
The SPC 1000 and 2000 portable cartridge fume collector is designed as a cost-effective, highly efficient, alternative solutions for filtering dusts, fume, smoke, gasses and vapors. These models both comply with OSHA standards for operations generating welding fume, dusts from grinding or sanding, and other processes.
Typically used for control of low to moderate concentrations of dry contaminants, the SPC 1000/2000 come with economical push-button pulse-jet filter cleaning to minimize maintenance and reduce replacement costs. The SPC 1000/2000 have horizontally mounted cartridges for lower center of gravity and stability. The unit comes standard with 1000 or 2000 nominal CFM and 115-volt single phase 1.5 or 3 HP TEFC motor.
For more information about SPC 1000/2000, download ACT-SPC-1000-Fume-Collector-2.pdf.
SPCBD 1000/2000 Backdraft Cartridge Dust Collector
The portable cartridge backdraft fume and dust collectors are engineered for effective, economical control of dry dusts, fume, and smoke generated from sanding, polishing, buffing, grinding and other processes.
Ideal for light to moderate concentrations of dry concentrations of dry contaminants. Fumes, vapors, smoke and particulate are drawn down and back – away from the operator’s breathing zone.
These ultra-portable units are designed to go where you need them. Easily deployed on the shop floor and even transported in a standard utility van, the SPCBD 1000/2000 enable you to meet OSHA requirements without inhibiting productivity.
Highly efficient cartridge filters trap particulate down to .5 microns (with many filter options, including HEPA and carbon), while pulse-jet compressed air blasts keep filters clear and operating at optimum efficiency. This unit offers true plug-n-go convenience, with a power cord and switch, standard.
For more information about Hazdust Wet Downdraft Table- Dust Collectors, download ACT-SPCBD-1000-Backdraft.pdf.
SPC Downdraft Table
The SPCB- 1000/2000, portable cartridge downdraft benches are engineered for effective, economical control of dry dusts, fume and smoke generated from sanding, polishing, grinding and more. Ideal for light to moderate concentrations of dry contaminants, fumes, vapors, smoke and particulate are drawn down and back- away from the operator’s breathing zone. Highly efficient cartridge filters trap particulate down to .5 microns, while pulse-jet compressed air blasts keep filters clear and operating at optimum efficiency.
The SPCB- 1000/2000 are compact and portable. Topped with an aluminum surface to protect parts that cannot be scratched, the SPCB can support a table load of 50 pounds per square foot. The top has a back enclosure with hinged side wing panels to expand and enclose the work zone.
For more information about SPC Downdraft Tables, download ACT-SPCD-1000-Downdraft-2.pdf.
Xtract Max- LV Laser
Xtract Max- LV Laser Fume Collector laser marking & welding vacuum filtration system is the industry standard for control of fumes, dusts, smoke, gases and vapors generated by laser manufacturing processes- laser marking, machining, welding cutting and drilling, as well as micro-soldering. The Xtract Max LV portable unit is completely self contained and ready for plug-and-play operation. This compact source capture collector eliminates airborne contaminants from such materials as metal, plastic, glass, ceramics, stone, composites, wood and other natural fibers, ensuring efficient and cost effective compliance with OSHA guidelines.
A built in push-button reverse pulse-jet cartridge filter cleaning system minimizes maintenance and reduces filter costs. The Xtract Max LV can be configured with a 99.97% efficient (to .3 microns) true HEPA filter, as well as activated carbon filtration. It can be fitted with one or two 2″ inlets, using extraction arm or hoses.
- HEPA module for 99.97% efficiency at .3 microns
- Carbon module for removal of gas/vapors and odors
- Multiple inlet configurations available
- 3.5 HP motor
- Auto pulse
- 1 PH with power cord and switch
For more information about Xtract Max- LV Lasers, download XtractMAX-LV-Laser1.pdf.
The Coral F-Series Line of Collectors has been engineered for the effective capture of many different contaminants created by a variety of applications- for fumes, smoke, odor, and dust. These compact units are designed to ensure healthier, cleaner air in a variety of different work environments. They are an economical air quality solution for applications including: soldering, welding fume extraction, laser fume extractors, dust collection, odor removal, industrial air filtration, electronics manufacturing, fume extraction & much more.
For fume collection, the filtering is performed through 3-stages of filtration, pre-filter, carbon filter and HEPA final filter. For Odor/VOC Collection, the filtering is performed through a refillable absorption module such as carbon. Other absorption medias are available depending on the application. For dust/weld/ fume collection, a pleated re-usable cartridge filter is supplied with 99% efficiencies down to .5 microns. Filters can be monitored with the optional Minihelic pressure differential gauge.
The F-Series fume and dust extraction systems are designed for use with 1, 2 or 3 extraction arms mounted to the unit or up to 10 extraction arms for multiple work stations; we also offer modular systems to handle larger requirements. These fume extraction systems also feature true HEPA, Cartridge or absorption air filtration and may be used with up to 50 work stations.
F-Series Accessories include articulating arms, fume hoods, and hoses for fume extractors.
For more information about F-Series,